It is a pain to get your car started when the battery dies. You have to find someone with a working vehicle, and then you can jumpstart it, but how do you start it without help? The good news is that some simple steps will allow you to start your car even if the battery has died.
Here are the best methods for how to start a car with a dead battery without another car
Use Jumper Cables
Jumping a car with a dead battery is an old-school trick that works well. You may need to buy some new jumper cables, but they’re cheap. Just make sure you have an open space to put the cables. Here is a step by step procedure:
- Park your car next to the battery.
- Connect the positive cable of one set of jumper cables to the positive terminal on the dead battery’s battery and connect the negative cable of another set of jumper cables to an unpainted metal surface such as a fender or engine block.
- Connect the other end of the second set of jumper cables to the positive terminal on your car’s battery and the negative cable of another set of jumper cables to an unpainted metal surface such as a fender or engine block.
- Start your car and leave it running.
- Your car battery should start to come back to life.
- When the engine has started, turn off your car and disconnect both sets of jumper cables from the battery.
- Dispose of any jumper cables that have been used to make the jump.
- Fully charge your car’s battery and check its voltage again before driving.
- If you still have problems, try jumping another car battery with a different brand or make of jumper cables.
- If none of these options work, take your car to a professional service center and have the problem diagnosed.
Use A Battery Charger
Charge your battery in a car that is not running to keep the voltage level up. Notice: If the battery has been discharged for a long period of time, it will be difficult or impossible to start the car with the charger. So, by using the battery charger, your battery will take longer to start. If you do not want to use a charger, try adding water to the battery. The more water in the battery, the faster it will start.
Here is a step-by-step procedure:
- Unplug the car’s battery. Be careful not to allow the terminals to touch each other.
- Remove the negative terminal ( – ) of the battery.
- Connect the charger’s power cord to the battery’s negative terminal.
- Insert the positive terminal ( + ) of the charger into any open receptacle on the car. WARNING: Never connect an extension cable with a car’s battery. The battery will be damaged.
- Start the car and allow it to run for at least 30 minutes or until the battery is fully charged. The charger can charge batteries that have been drained completely or nearly completely. Chargers are not necessary for use with a dead battery. A car’s battery is fully charged when the charger’s light goes from amber to green.
- When the battery is fully charged, disconnect the charger from the car.
- Disconnect the battery from the car and store it in a safe place.
Use A Tow Truck
The tow truck will be able to start the car because of its high voltage battery. If the tow truck’s battery is drained, you can use another car’s battery to start it by connecting its positive terminal to the dead car’s negative terminal.
Here is a step-by-step procedure on how to do it:
- Connect the positive terminal of the dead car’s battery to the positive terminal on another car’s battery.
- Connect the negative terminal of the dead car’s battery to the ground or metal object.
- Start the dead car by engaging the ignition (engine) in the dead car’s key switch.
- Turn off the ignition (engine) in the dead car’s key switch.
- Disconnect the positive terminal from the other car’s battery.
- Disconnect the negative terminal from the ground or metal object.
- Make sure that the car’s key switch is on and that the ignition (engine) is not running.
- Put the dead car’s key switch in the “on” position.
- Finally, make sure that both cars’ batteries are fully charged. Unplug the dead car’s battery for at least 24 hours to ensure that you are sure the problem is due to a battery charge problem. Then, reconnect the dead car’s battery and test its operation again.
Pro Tips How To Start A Car With A Dead Battery Without Another Car?
When your car won’t start, you can usually count on someone nearby to help get you going. But what if there’s no one around? Or what if your battery is dead and you need a jump?
Here are some pro tips for How To Start A Car With A Dead Battery Without Another Car
1. Clear the Clutch – If your car won’t start, try to start it by pressing the clutch. This will clear the gas from the engine and allow it to turn over. This is the most common way to start a car that won’t crank without a battery.
2. Jump the Car – This can be a good trick if your battery is dead. If you’re able to get a jump from another vehicle, try to start the engine. The jumper cables will transfer power from your car’s battery to the other vehicle’s battery and hopefully start it up.
3. Jump the Alternator – If you’re able to get a jump from another vehicle but still can’t start your car, try to jump the alternator. The alternator has a higher voltage and should be able to turn over the engine.
4. Jump the Starter – If you’re able to get a jump from another vehicle but still can’t start your car, try to jump the starter. This is an easy way to diagnose problems with the starter because it’s located in an easily accessible place.
5. Jump the Fuel Pump – If you’re able to get a jump from another vehicle but still can’t start your car, try to jump the fuel pump. This will allow power from the engine to go through the fuel system so that it can be used by the fuel pump.
6. Check the Battery – If you’re able to start your car but can’t keep it running, check the battery. If it’s low or dead, jump-starting with a new battery should solve the problem.
7. Check the Starter – If you’re able to start your car but can’t keep it running, check the starter. If it’s broken or damaged, replacing it should be a quick fix.
8. Check the Ignition – If you’re able to start your car but can’t keep it running, check the ignition. A faulty or broken ignition can cause this problem.
9. Jump a Different Vehicle – If all else fails, try jump-starting with another vehicle. This may or may not work, but it’s worth a shot.
10. Clear the Code – If you’re able to start your car but can’t keep it running, check for a code. If there is one, clearing the code should solve the problem and make your battery last longer.
11. Replace the Battery – If you’re able to start your car but can’t keep it running, replace the battery. After this is done, the problem should disappear and your car should be back on its feet.